A focused furniture collection for the examination room.Beijing Enoch Corporation / sales@enochtec.com
ENOCHTECREFRACTION
ENOCHTECREFRACTION
Height-adjustable tables for slit lamps, autorefractors, tonometers and other bench instruments.
An ophthalmic instrument table — also listed as an ophthalmic bench, an ophthalmic desk or an eye exam table — carries the bench instruments that sit outside the refraction unit. What separates the eight models below is the size of the work surface, how far it travels vertically, and what the specification rates it to carry. Loading is the figure to check first: a single slit lamp and a heavily loaded twin-instrument top are very different duties.
Instrument tables look alike on paper. Three figures separate them in practice. The selection guide sets these tables against the refraction units and the chairs.
A single large top takes one instrument plus writing space; twin tops keep two instruments at their own working heights. Measure the instrument base plus the clearance its moving parts need, not the instrument footprint alone.
A height range tells you where the top sits; the lift travel tells you how far it moves under load. Both matter when the same table is shared between a seated examiner and a standing one.
Load ratings across this line run from 55 kg to 200 kg. Match the rating to the heaviest instrument the table will ever carry, including any mounted arm or shelf, rather than to the instrument planned for day one.
Supply voltage is built to order; 110 V and 220 V are both available. Confirm voltage, frequency and plug type on the quotation for the destination market.
Every model uses its original model number. Open a model for the full specification table and what is included in the furniture supply scope.
Large top with adjustable equipment shelf
Large top with a computer case on one side and a printer case on the other
1050 mm top, drawer under the work surface
200 kg load rating
400 × 480 top, DC motor
Drawer sized for a trial lens set
Smallest top, open tool tray
Wide-top lift table that powers three instruments
Figures below are the specification values for each model. A blank cell means that figure is not specified for that model — we do not estimate it. Load ratings are specification figures and are marked as such.
| Model | Tabletop size | Height range | Lift travel | Load capacity | Power supply |
|---|---|---|---|---|---|
| LY-3S-1 | 600 × 1080 mm | 680–880 mm | — | 120 kg | AC 220 V / 50 Hz or 110 V / 60 Hz (specified on the quotation) |
| LY-3S-1A | 600 × 1080 mm | 680–880 mm | — | 120 kg | AC 220 V / 50 Hz or 110 V / 60 Hz (specified on the quotation) |
| WB-31L10 | 1050 × 550 mm | 660–860 mm | 200 mm | 60 kg | AC 220 V / 50 Hz or 110 V / 60 Hz (specified on the quotation) |
| WB-31ADT | 600 × 460 mm | 650–850 mm | 200 mm | 55 kg | AC 220 V / 50 Hz or 110 V / 60 Hz (specified on the quotation) |
| WB-3A | 480 × 400 mm | 630–830 mm | 200 mm | 55 kg | AC 220 V / 50 Hz or 110 V / 60 Hz (specified on the quotation) |
| LY-3AH | 480 × 550 mm | 630–820 mm | — | 200 kg | AC 220 V / 50 Hz or 110 V / 60 Hz (specified on the quotation) |
| LY-3AD | 400 × 480 mm | 630–800 mm | — | 65 kg | AC 220 V / 50 Hz or 110 V / 60 Hz (specified on the quotation) |
| LY-3BD | 1060 × 550 mm | 680–860 mm | — | 100 kg | AC 220 V / 50 Hz or 110 V / 60 Hz (specified on the quotation) |
Scroll the table sideways on a narrow screen.
Diagnostic instruments shown in product photography — phoropters, chart projectors, autorefractors, slit lamps — illustrate use and are not part of the furniture supply scope unless a quotation states otherwise.
Standard and optional items, plug type and voltage version are confirmed against the quotation for each order. Standard warranty is 12 months from delivery. Within that period ENOCH supplies the replacement parts needed for any fault not caused by misuse or accidental damage.
Prices are quoted per configuration. Send the room dimensions and the instruments to be mounted and we will come back with a configuration and a quotation.
A powered-height table that carries desktop diagnostic instruments — autorefractor, keratometer, slit lamp, biometer — and lets the practitioner set the working height electrically instead of using a fixed desk.
Load capacities are LY-3AH 200 kg, LY-3S-1 and LY-3S-1A 120 kg, LY-3BD 100 kg, LY-3AD 65 kg, WB-31L10 60 kg, and WB-31ADT and WB-3A 55 kg each. If the instrument is heavy, send the model and its weight and the load capacity is confirmed in writing before quoting.
From 400 × 480 mm — the footprint LY-3AD and WB-3A share, for a single small instrument — up to 600 × 1080 mm (LY-3S-1 and LY-3S-1A). LY-3BD is 1060 × 550 mm, LY-3AH is 480 × 550 mm, WB-31ADT 600 × 460 mm and WB-31L10 1050 × 550 mm.
Height range here means floor-to-tabletop working height, not lift travel and not chair height. Where specified: LY-3AD 630–800 mm, LY-3AH 630–820 mm, WB-3A 630–830 mm, WB-31ADT 650–850 mm, WB-31L10 660–860 mm, LY-3BD 680–860 mm, LY-3S-1 680–880 mm, LY-3S-1A 680–880 mm. Lift travel is listed separately in the comparison table where given (200 mm on WB-31L10, WB-31ADT and WB-3A). These instrument tables do not include a chair height.
All eight models (LY-3S-1, LY-3S-1A, WB-31L10, WB-31ADT, WB-3A, LY-3AH, LY-3AD and LY-3BD) are listed for AC 220 V / 50 Hz or 110 V / 60 Hz (voltage version specified on the quotation for each order). Voltage and plug version are confirmed against the quotation for each order.
Send the room dimensions, the instruments to be mounted and the destination market, and we will come back with a configuration, lead time and quotation.